Anti-static PEEK Sheet Vs. Ordinary PEEK Sheet

Anti-static PEEK sheet and ordinary PEEK sheet is based on Polyetheretherketone (Polyetheretherketone, referred to as PEEK) material made of sheet, there are some differences in performance and characteristics. The following is the difference between anti-static PEEK sheet and ordinary PEEK sheet:

1. Anti-static properties: anti-static PEEK sheet has better anti-static properties, by adding conductive agents in the material, can effectively prevent static electricity accumulation and electrostatic discharge phenomenon. And ordinary PEEK board does not have anti-static properties.

2. Surface resistivity: antistatic PEEK board surface resistivity is low, usually between 10^3-10^9 Ω, can be in the anti-static range. The surface resistivity of ordinary PEEK board is higher, usually between 10^13-10^15 Ω, which cannot effectively prevent static buildup.

3. Polymer structure: antistatic PEEK board in the addition of conductive agents can change the polymer structure, so that the formation of conductive network structure, in the electronic level to provide continuous conductive effect. While ordinary PEEK boards have no conductive agent added, the polymer structure is pure.

4. Fields of use: Because the anti-static PEEK board has anti-static characteristics, can avoid static electricity on electronic components and sensitive equipment damage, so commonly used in electronics, semiconductors, medical equipment, aerospace and other areas that require anti-static protection. Ordinary PEEK board is commonly used in machinery, automotive, aviation and other fields, the anti-static requirements are not high occasions.

5. Other performance differences: anti-static PEEK board and ordinary PEEK board in other properties are basically consistent, including high temperature resistance, corrosion resistance, mechanical properties and wear resistance. They both have excellent chemical resistance, rigidity and heat resistance, and can adapt to the requirements of the harsh working environment.

It should be noted that the conductivity of anti-static PEEK sheet will gradually decrease over time. In addition, in some special application scenarios, anti-static PEEK board may require further grounding, static dissipation and other processing to ensure effective anti-static effect.

In summary, anti-static PEEK boards are mainly used to achieve anti-static function by adding conductive agents, and are suitable for areas with high requirements for anti-static performance, while ordinary PEEK boards do not have anti-static properties and are suitable for general mechanical and engineering applications. The choice of which type of PEEK board should be based on specific application requirements and environmental conditions to decide.