All Products

Plastic gear nylon customized gear

Nylon gears for transmission equipment Nylon has good overall performance, including mechanical properties, heat resistance, wear resistance, chemical resistance and self-lubricating, and low coefficient of friction, a certain degree of flame...

DuPont ™ Vespel ® CR-6110 carbon-fiber filled thermoplastic

Vespel® CR family provides excellent chemical resistance in refineries or chemical processing. They offer high-creep resistance for seals, run-dry capability for wear rings for pumps and easy machinability for tight-tolerance parts like ball-valve...

Nylon (PA) CNC Machining

Introduction to the characteristics of nylon machined parts Nylon material in precision machining is also a commonly used materials, often used to process small precision fixtures, due to the hardness, toughness and processing characteristics of the...

TECAPEEK ® PVX PEEK sheet rod

TECAPEEK PVX black is a modified PEEK material using Victrex® PEEK 450 or Solvay KetaSpire® KT-820 and is classified in the same performance category as Victrex® PEEK™ FC30. TECAPEEK PVX black was developed especially for bearing and sliding...

Ultra detectable PEEK - TECAPEEK® UD blue

TECAPEEK UD blue multi-detectable plastic has the highest temperature and chemical resistance capability of all of Ensinger's Ultra-detectable Products. With a heat deflection temperature over 300°F, and excellent resistance to a wide range of...

PEEK unfilled TECAPEEK® natural

Polyetheretherketone (PEEK) - TECAPEEK natural is a high performance, high temperature, semi crystalline thermoplastic manufactured by Ensinger and may use Victrex® PEEK 450 or Solvay Ketaspire® KT-820 polymer. The most well known and important...

SustaPEEK MOD black sheet

The SustaPEEK MOD family of materials is based on polyetheretherketone resin. This semi-crystalline advanced material exhibits a unique combination of high mechanical properties, temperature resistance and excellent chemical resistance making it the...

Ketron® CM CA30 - 30% Carbon Fiber-Filled PEEK

Ketron® CM CA30 PEEK is a compression molded, 30% carbon fiber-reinforced polyetherether ketone that exhibits outstanding impact, corrosion, chemical, and wear resistance. With a significantly reduced thermal expansion, optimum load carrying...

Ketron® CM GF30 PEEK Poly-ether-ether-ketone

Ketron® GF30 Polyetheretherketone PEEK is a compression molded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has...

Ketron® CA30 Carbon fiber reinforced PEEK

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum...

HONYPLAS®PEEK carbon fiber sheet rod

HONYPLAS®PEEK 30CF have higher mechanical strength and rigidity, the tensile strength is as high as 284MPa, which is only slightly lower than that of aluminum alloy, and its specific strength is as high as 206MPa, which is much higher than that of...

Ketron® GF30 PEEK Poly-ether-ether-ketone

Ketron® GF30 Polyetheretherketone PEEK is an extruded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has a...

Fluorosint® 500 PTFE Polytetrafluoroethylene

Fluorosint® 500 Polytetrafluoroethylene PTFE shapes possess a unique combination of stability and wear resistance, for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load...

SustaPEEK MOD black sheet rod

SustaPEEK MOD black PEEK The SustaPEEK MOD family of materials is based on polyetheretherketone resin. This semi-crystalline advanced material exhibits a unique combination of high mechanical properties, temperature resistance and excellent chemical...

Micarta Phenolic Handle Material

Micarta is a brand name for composites of linen, canvas, paper, fiberglass, carbon fiber, or other fabric in a thermosetting plastic. It was originally used in electrical and decorative applications. Micarta was developed by George Westinghouse at...

CIP composite sheet tubes

Columbia Industrial Products offers multiple textile, lubrication and resin combinations to provide the most suitable material for your application. Below are the most common CIP Composite material grades. Our dedicated team will help you choose...

CIP Composites Tube Sheet

CIP Composites are available in tubes or sheets made to your specification. CIP Composites are readily machinable by conventional machining techniques. As a general guide they may be treated as bronze, but machined (dry) without coolant. CIP...

CIP composites sheet plate

Cip Composite Material are available in tubes or sheets made to your specification. CIP Composites are readily machinable by conventional machining techniques. As a general guide they may be treated as bronze, but machined (dry) without coolant. CIP...

Vesconite Hilube Sheet Rod Tube

Vesconite Hilube is our flagship bearing material, designed for particularly difficult operating environments. Vesconite Hilube is specifically recommended for moist and underwater applications. These include the pump and marine industry, where...

Vesconite black sheet plate

Vesconite ® is a material specially designed for bearings. The material is often applied in seats and bearing bushes in industrial, agricultural and maritime applications. It is also applied in the mining industry.Vesconite Plastic Products A...

Vesconite Standard Bushing Material

What is Veconite material? Vesconite material is an advanced bearing material developed and produced by vesconite. It is a special thermoplastic made of internally lubricating polymers that has been used in practice since the late sixties long-term...

Vesconite Bearings Engineered Polymers

Vesconite Tube Rod Vesconite Sheet Rod Bushing replacement for traditional bushing and bearing materials. Offering a unique combination of high load-bearing strength, low friction and low wear, Vesconite does not require manual lubrication, even in...

GEHR PEEK-30GF Glass Filled Sheet & Rod

The material PEEK-30GF is a variant of PEEK modified with 30 % glass fibres. This modification significantly increases the surface hardness and heat deflection temperature compared to the already high values of the unreinforced standard type. The...

Sustamid® 6G natural PA PA 6G natural

SUSTAMID 6G provides excellent sliding properties and impact resistance and is commonly used in applications requiring larger parts. This product is manufactured by directly casting the raw materials into a mold to produce sheets, rods, tubes and...