| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Sustamid® 6G natural PA PA 6G natural
Brand: SUSTAMID
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
SUSTAMID 6G provides excellent sliding properties and impact resistance and is commonly used in applications requiring larger parts. This product is manufactured by directly casting the raw materials into a mold to produce sheets, rods, tubes and near-net shapes. SUSTAMID 6G Natural is off-white in color and is commonly used in food processing applications.
Key Properties
Excellent sliding properties
Continuous use temperature of 200° F
Good abrasion resistance
High mechanical and impact strength
Highly resistant to hydrocarbons, alkalis and oils
Excellent machinability
Natural is FDA compliant
Limitations
High Moisture Absorption
Limited Resistance to Strong Acids & Alkalies Note - Nylons can absorb up to 7% (by weight) water under high humidity or submerged in water. This can result in dimensional changes up to 2% and a corresponding reduction of physical properties. Proper design techniques can frequently compensate for this factor.
Applications
Bushings & Bearings
Gears
Sheaves
Sprockets
Thrust Washers
Timing Screws
Wear Pads
Available Sizes
Sheet*
Thickness .250” to 4.000”
Width & Length 24.000” x 48.000”
Width & Length 48.000” x 96.000”
Rod*
Diameters 2.000” to 4.500” Length 10’
Diameters 5.000” to 12.250” Length 4’
Diameters 13.000” to 23.500” Length 2’
tube*
OD Outside Diameter 4.000” to 42.000”
ID Inside Diameter 2.000” to 37.000”
Available Colors
Natural
Typical Properties of Sustamid ® 6G Natural Type 6 Nylon
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | PA Polyamide Type 6 | ||
| Trade Name | Sustamid® 6G Type 6 Nylon | ||
| Additives | Unfilled | ||
| Color | Natural | ||
| Manufacturer | Rochling | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.14 |
| ASTM D792 | lb/in³ | 0.041 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 1 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 12000 |
| Tensile Modulus | ASTM D638 | psi | 550000 |
| Tensile Elongation at Break | ASTM D638 | % | 25 |
| Flexural Strength | ASTM D790 | psi | 15000 |
| Flexural Modulus | ASTM D790 | psi | 420000 |
| Compressive Strength | ASTM D695 | psi | 15500 |
| Hardness | ASTM D785 | NA | Rockwell M85 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.6 |
| Dynamic Coefficient of Friction | NA | 0.22 | |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 4.5 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 91 |
| ASTM D648 | °F at 264 psi | 195 | |
| Melting Point Temp | ASTM D3418 | °C | 232 |
| ASTM D3418 | °F | 450 | |
| Max Continuous Operating Temp | °C | 93 | |
| °F | 200 | ||
| Minimum Operating Temp | °C | -30 | |
| °F | -22 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.7 |
| Flammability Rating | UL94 | NA | HB |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 500 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.8 |
| Surface Resistivity | ASTM D257 | ohm/square | >10^13 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now