| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: TECAMID 66 natural PA 66 UNFILLED
Brand: TECAMID
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Polyamide 66 has good rigidity, hardness, abrasion resistance and thermal dimensional stability. In addition, nylon 66 has outstanding wear resistance and low frictional properties. It also has very good temperature, chemical, and impact properties. Users should be aware of PA 66 propensity to absorb moisture which could affect dimensional stability. In fact, PA 66 will tend to absorb more moisture at saturation than cast PA type 6. It has been successfully used in diverse applications ranging from electronics, marine, and automotive industries, to forrestry, construction and mining.
FACTS
Chemical designation
PA 66 (Polyamide 66)
Colour
ivory
Density
1.15 g/cm3
MAIN FEATURES
good slide and wear properties
electrically insulating
good wear properties
good weldable and bondable
high strength
resistant to many oils, greases and fuels
high toughness
TARGET INDUSTRIES
mechanical engineering
food technology
electronics
aircraft and aerospace technology
automotive industry
TECAMID 66 natural PA 66 UNFILLED Technical Data Sheet
| Mechanical Properties | ||||
| VALUE | UNIT | PARAMETER | NORM | |
| Modulus of elasticity | 3500 | MPa | 1mm/min | DIN EN ISO 527-2 |
| (tensile test) | ||||
| Tensile strength | 85 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Tensile strength at yield | 84 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Elongation at yield (tensile test) | 7 | % | 50mm/min | DIN EN ISO 527-2 |
| Elongation at break (tensile test) | 70 | % | 50mm/min | DIN EN ISO 527-2 |
| Flexural strength | 110 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Modulus of elasticity | 3100 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| (flexural test) | ||||
| Compression modulus | 2700 | MPa | 5mm/min, 10 N | EN ISO 604 |
| Impact strength (Charpy) | n.b. | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eU |
| Notched impact strength (Charpy) | 5 | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eA |
| Ball indentation hardness | 175 | MPa | ISO 2039-1 | |
| Compression strength | 20/35/81 | MPa | 1% / 2% / 5% | EN ISO 604 |
| Thermal Prpperties | ||||
| ROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Glass transition temperature | 47 | C | DIN EN ISO 11357 | |
| Melting temperature | 258 | C | DIN EN ISO 11357 | |
| Thermal conductivity | 0.36 | W/(k*m) | ISO 22007-4:2008 | |
| Specific heat | 1.5 | J/(g*K) | ISO 22007-4:2008 | |
| Service temperature | 170 | C | short term | NN |
| Service temperature | 100 | C | long term | NN |
| Thermal expansion (CLTE) | 11 | 10-5*1/K | 23-60℃, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 12 | 10-5*1/K | 23-100℃, long. | DIN EN ISO 11359-1;2 |
| Electrical Properties | ||||
| ROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| surface resistivity | 1014 | Ω | - | |
| volume resistivity | 1014 | Ω | ||
| Other Properties | ||||
| VALUE | UNIT | PARAMETER | NORM | |
| Resistance to hot water/ bases | (+) | - | - | |
| Flammability (UL94) | HB | - | corresponding to | DIN IEC 60695-11-10; |
| Resistance to weathering | - | - | - | |
| Water absorption | 0.2 - 0.4 | % | 24h / 96h (23°C) | DIN EN ISO 62 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now