| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Ketron® CA30 PEEK
Brand: Ketron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.
Material Properties
Abrasion resistant
Outstanding chemical and wear resistance
Reduced thermal expansion
Ability to extend part life and rapidly dissipate heat
Optimum load carrying capabilities
Available Geometries
Ketron® CA30 PEEK stock shapes encompass a range of standard sizes in the following geometries: Tubular bar, Rod, Plate
Available Colors
Ketron® CA30 PEEK stock shapes come in the following colors: Black
Key Properties
Better Wear Properties Over Unfilled PEEK
Enhanced Dimensional Stability Over Unfilled PEEK
Higher Strength & Stiffness Over Unfilled PEEK
Higher Thermal Conductivity Over Unfilled PEEK
Limitations
Poor Chemical Resistance to Halogens and Their Acids Including Bromine, Chlorine, Fluorine, HBr and HF
Applications
Back Up Rings
Bushings & Bearings
Heat Sink Components
Oil & Gas Components
Pump Case Wear Rings
Pump Throat Bushings
Rollers
Structural Components
Thrust Washers
Typical Properties of Ketron ® CA30 PEEK
Description Value Material Type Semi-Crystalline Thermoplastic Chemical Name PEEK Polyetheretherketone Trade Name Ketron®CA30 PEEK Additives 30% Carbon Color Black Manufacturer Quadrant PHYSICAL Property Test Unit of Measure Value Density ASTM D792 g/cm³ 1.41 ASTM D792 lb/in³ 0.051 Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.06 Water Absorption, Saturation, Immersion ASTM D570 % by wt. 0.3 MECHANICAL Property Test Unit of Measure Value Tensile Strength ASTM D638 psi 19000 Tensile Modulus ASTM D638 psi 1100000 Tensile Elongation at Break ASTM D638 % 5 Flexural Strength ASTM D790 psi 25750 Flexural Modulus ASTM D790 psi 1250000 Compressive Strength ASTM D695 psi 29000 Hardness ASTM D785 NA Rockwell M102 IZOD Impact-Notched ASTM D256 ft-lb/in 1.03 Dynamic Coefficient of Friction QTM 55007 (Dry vs Steel) NA 0.2 Wear K Factor QTM 55010 in³-min/ft-lbs-hr 150 Limiting PV QTM 55007 psi-fpm 25000 THERMAL Property Test Unit of Measure Value Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./°F 1 Heat Deflection Temp ASTM D648 °C at 264 psi 270 ASTM D648 °F at 264 psi 518 Melting Point Temp ASTM D3418 °C 340 ASTM D3418 °F 644 Max Continuous Operating Temp °C 250 °F 482 Minimum Operating Temp °C -60 °F -76 Thermal Conductivity ASTM C117 BTU-in/ft²-hr-°F 6.4 Flammability Rating UL94 NA V-0 ELECTRICAL Property Test Unit of Measure Value Dielectric Strength ASTM D149 V/mil 32 Surface Resistivity ASTM D257 ohm/square <10^5
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now