| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Ketron® CM GF30 PEEK
Brand: Ketron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Ketron® GF30 Polyetheretherketone PEEK is a compression molded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron® GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C.
Material Properties
Compression molded
Favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°
High flexural modulus
Excellent wear resistance and toughness
Low expansion rate
Abrasion resistant
Outstanding dimensional stability
Available Geometries
Ketron® CM GF30 PEEK stock shapes encompass a range of standard sizes in the following geometries: Tubular bar, Plate
Available Colors
Ketron® CM GF30 PEEK stock shapes come in the following colors: Natural (beige)
Key Properties
Enhanced Dimensional Stability Over Unfilled PEEK
Higher Strength & Stiffness
Ideal for High Strength High Temp Structural Applications
Compression Molded Grade Offers Larger Shapes & Thicker Cross Sections
Limitations
Poor Chemical Resistance to Halogens and Their Acids Including Bromine, Chlorine, Fluorine, HBr and HF
Applications
Connectors
Electrical Housings
Structural Food Processing Components
Structural Oil & Gas Down Hole Components
Structural Parts
Typical Properties of Ketron ® CM GF30 PEEK
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | PEEK Polyetheretherketone | ||
| Trade Name | Ketron®CM GF30 PEEK | ||
| Additives | 30% Glass | ||
| Color | Black | ||
| Manufacturer | MCAM | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.59 |
| ASTM D792 | lb/in³ | 0.057 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.15 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 0.5 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 7400 |
| Tensile Modulus | ASTM D638 | psi | 850000 |
| Tensile Elongation at Break | ASTM D638 | % | 1 |
| Flexural Strength | ASTM D790 | psi | 12000 |
| Flexural Modulus | ASTM D790 | psi | 900000 |
| Compressive Strength | ASTM D695 | psi | 19000 |
| Compressive Modulus | ASTM D695 | psi | 500000 |
| Hardness | ASTM D785 | NA | Rockwell M103 (R124) |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.4 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 232 |
| ASTM D648 | °F at 264 psi | 450 | |
| Melting Point Temp | ASTM D3418 | °C | 340 |
| ASTM D3418 | °F | 644 | |
| Max Continuous Operating Temp | °C | 249 | |
| °F | 480 | ||
| Minimum Operating Temp | °C | -60 | |
| °F | -76 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 3.06 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 550 |
| Surface Resistivity | ASTM D257 | ohm/square | >10^13 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now