All Products

Tecadur PET machined part

Tecadur PET polyethylene terephthalate is a semi-crystalline engineering thermoplastic with very high strength and good rigidity , excellent machinability and versatility of application.Ensinger offers unfilled and unmodified PET polyester as a...

DuPont™ Vespel ® Polyimide SP-3 15% MoS2 Filled

DuPont™ Vespel® SP-3 is a molybdenum disulfide filled grade of DuPont™ Vespel® that provides outstanding friction and wear performance in vacuum and other moisture-free environments where graphite additives can become abrasive.DuPont™ Vespel® SP-3...

Duratron® D7000 PI Polyimide Plastic Sheet Rod

Duratron® D7000 PI hot compression molded shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these...

Duratron® D7015G 15% Graphite-filled PI

Duratron® D7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression molded Duratron® D7015G PI maintain its performance...

Duratron® D7040G - 40% Graphite-filled PI

Duratron® D7040G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression molded Duratron® D7040G PI maintain its performance...

Duratron® DF7000 PI Polyimide Sheet Rod

Duratron® DF7000 direct-formed parts and near net polyimide shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In...

PLAVIS ® PI (Polyimide) Grades

Plavis®Polyimide Shapes provide superior high temperature resistance, excellent wear and friction properties, good electrical and physical properties and chemical inertness.Plavis exhibits outstanding resistance to creep as well as lubricated or...

TECASINT®2021 black POLYIMIDE WITH 15 % GRAPHITE

TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear behaviour. Thanks to its self lubricating...

TECASINT® 2011 natural UNFILLED POLYIMIDE

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining...

DuPont™ Vespel® SP-21 low-friction properties

DuPont™ Vespel® SP-21 is graphite-enhanced with low-friction properties for use with or without lubrication in various applications. Vespel® SP-21 has maximum physical strength, elongation, and toughness. Available as custom parts or stock shapes....

POM Delrin Acetal CNC Machining Services

Polyoxymethylene (POM), also known as polyacetal, polyoxymethylene, and polyoxymethylene, is one of the plastic materials that has many advantages when it comes to CNC machining parts. This plastic is popular across several industries due to its...

Black white POM ring tube spacer cylindrical

This is the standard POM (Duracon) spacer, 4mm inner and 7mm outer diameter.Low friction material has selected and high precision processing has applied for this particular product which is included at RD-008, RD-008B and other HG Front conversion...

Customized PEEK CNC parts

HONYPLAS®PEEK Polyetheretherketone has the heat resistance and chemical stability of thermosetting plastics and the molding processability of thermoplastics. The long-term use temperature of PEEK is about 260-280°C, the short-term use temperature...

Machining PEEK for Medical Industry

Polymer PEEK (polyether ether ketone) in the field of medical equipment applications Polyether ether ketone (PEEK) resin is issued by the late 1970s a special engineering plastics with super characteristics, is currently the thermoplastic resin in...

Black POM CNC machined part

HONY®Polyoxymethylene is a thermoplastic engineering plastic with excellent performance developed after nylon. Its performance is no less than nylon, but its price is lower than nylon. Polyacetal resin is white powder, after granulation, it is light...

POM wheel plastic pulley ball bearing

HONY®Bearing plastic POM,Low friction POM/Nylon plastic coated bearings,High precision non standard plastic/POM/nylon coated bearing ,POM plastic coated bearings Good mechanical strength and wear resistance , suitable for the production of more...

TECAFORM POM Machined Parts

The POM material is usually called acetal (the chemical name is polyoxymethylene). Ensinger can provide POM extruded sheets, bars and pipes, which can be used for machining. POM plastic is a semi-crystalline thermoplastic with high mechanical...

Custom PEEK CNC Machining

PEEK Material Machining Tool Guide As a thermoplastic engineering plastic, PEEK polyetheretherketone material is also very particular in its processing: PEEK material features: •PEEK shapes are stronger and harder than most plastics, but softer than...

Peek Temporary Continuity Connector 2-WAY

The PEEK 2-way is a commonly used tubing connection in liquid chromatography (HPLC) systems. It can be easily connected to the fitting line and can be used as a stand-alone fitting or in conjunction with a cutting edge ring.The PEEK tee has a...

Customized PEEK solid ball

PEEK ball, PEEK universal ball and PEEK ball are widely used in semiconductor, food packaging, automobile manufacturing and other industries. Compared with traditional metal ball and rubber ball, PEEK has incomparable advantages: good wear...

PEEK machined part CNC part

HONYPLAS®PEEK is a kind of heat-resistant, high performance thermoplastic special engineering plastics. It has good mechanical properties and chemical resistance, abrasion resistance, and hydrolysis resistance properties etc.; Peek Cnc Machined Part...

TECAPEEK CNC machined part

Ensinger's PEEK material (chemical name polyether ether ketone) uses Victrex® PEEK 450G or Solvay KetaSpire® KT-820 to provide semi-finished rods, plates and tubes. Through extrusion, the plastic can be used for machining. PEEK is a unique...

Carbon Fiber filled PEEK Machined Parts

HONYPLAS®PEEK Polyetheretherketone PEEK can provide hardness, temperature resistance, and lubricating effect by adding fibers such as carbon fiber, glass fiber, graphite, etc.Adding carbon fiber to PEEK: It provides hardness, temperature resistance,...

Custom PEEK Machined Parts

HONYPLAS®PEEK is an abbreviation for polyetheretherketone, a high performance engineering thermoplastic.PEEK grades offer good chemical and water resistance and can operate at high temperatures.PEEK can be used continuously to 480°F (250°C) and in...