Duratron® D7015G 15% Graphite-filled PI
Get Latest PricePayment Type: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDU |
Min. Order: | 1 Kilogram |
Transportation: | Ocean,Land,Air,Express |
Port: | Shenzhen,Guangzhou,Hongkong |
Payment Type: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDU |
Min. Order: | 1 Kilogram |
Transportation: | Ocean,Land,Air,Express |
Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Duratron® D7015G 15% Graphite-filled PI
Brand: Duratron
Selling Units | : | Kilogram |
Package Type | : | Export package |
Duratron® D7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression molded Duratron® D7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor.
Material Properties
Superior temperature and wear resistance
Low coefficient of friction
No lubrication needed
Suitable for high loads and speeds
Available Geometries
Duratron® D7015G PI stock shapes encompass a range of standard sizes in the following geometries: Plate
Plate
Available Colors
Duratron® D7015G PI stock shapes come in the following colors: Dark Grey
Applications
High Pressure High Temperature Bushings and Bearings
Valve and pump seats, seals and wear surfaces
Metal replacement for Aerospace components - lightweight, lubrication free
Key Properties
THERMAL RESISTANCE OVER 500°F
Good chemical resistance
Easily machined from a broad range of shapes - rod, sheet, tubular forms
High strength, tough and dimensionally stable
Lower K Wear Factor than Duratron D7000
Higher Limiting PV than Duratron D7000
Limitations
Chemical Resistance to Some Strong Acids and Bases
Hydrolyzes in Presence of Steam
Typical Properties of Duratron ® D 7015 G PI 15% Graphite
Description | Value |
Material Type | Imidized Amorphous Thermoplastic |
Chemical Name | PI Polyimide |
Trade Name | Duratron® D7015G PI |
Additives | Bearing Grade Additives |
Color | Black |
Manufacturer | Mitsubishi Chemical Advanced Materials |
PHYSICAL | |||
Property | Test | Unit of Measure | Value |
Density | ASTM D792 | g/cm³ | 1.45 |
ASTM D792 | lb/in³ | 0.052 | |
Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.5 |
Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 3 |
MECHANICAL | |||
Property | Test | Unit of Measure | Value |
Tensile Strength | ASTM D638 | psi | 11000 |
Tensile Modulus | ASTM D638 | psi | 650000 |
Tensile Elongation at Break | ASTM D638 | % | 3 |
Flexural Strength | ASTM D790 | psi | 16500 |
Flexural Modulus | ASTM D790 | psi | 640000 |
Compressive Strength | ASTM D695 | psi | 25000 |
Compressive Modulus | ASTM D695 | psi | 360000 |
Hardness | ASTM D785 | NA | Rockwell R126 |
IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.8 |
Dynamic Coefficient of Friction | QTM 55007 (Dry vs Steel) | NA | 0.25 |
Wear K Factor | QTM 55010 | in³-min/ft-lbs-hr | 10 |
Limiting PV | QTM 55007 | psi-fpm | 40000 |
THERMAL | |||
Property | Test | Unit of Measure | Value |
Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 2.5 |
Heat Deflection Temp | ASTM D648 | ℃ at 264 psi | 366 |
ASTM D648 | ℉ at 264 psi | 690 | |
Max Continuous Operating Temp | ℃ | 304 | |
°F | 580 | ||
Minimum Operating Temp | ℃ | -195 | |
°F | -319 | ||
Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 2.7 |
Flammability Rating | UL94 | NA | V-0 |
ELECTRICAL | |||
Property | Test | Unit of Measure | Value |
Dielectric Strength | ASTM D149 | V/mil | 186 |
Dielectric Constant at 1 MHz | ASTM D150 | NA | 5.42 |
Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.007 |
Surface Resistivity | ASTM D257 | ohm/square | <10^4 |
Description | Value |
FDA | No |
USDA | No |
NSF | No |
3-A Dairy | No |
Canadian Food Inspection Agency | No |
USP Class VI | No |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.