Which plastic bearing materials can HONY process?

Which plastic bearing materials can HONY process?

Based on the various high-functional plastics we choose, the bearings produced by HONY have the characteristics of light weight, low inertia, water resistance, non-magnetic and no lubrication.

We use a variety of materials to adapt to different working conditions, such as occasions where lubricating grease will pollute the product, where the bearing needs to have low hardness and good elasticity and toughness, where the product will not be damaged, and where static electricity needs to be released, our commonly used The materials are as follows:

Polyimide
Polyimide has excellent mechanical properties, high temperature resistance and radiation resistance. The continuous working temperature in the air is 280°C, and it can be as high as 320°C for a short time.

PEEK
PEEK has excellent mechanical properties and corrosion resistance, and is one of the most popular high-performance plastics today. Has good high temperature resistance. The continuous working temperature in the air is 250°C, and it can be as high as 310°C for a short time.

Main features of PEEK:
The maximum allowable operating temperature in air is very high
Mechanical strength, high rigidity and hardness

Excellent chemical and hydrolysis resistance
excellent dimensional stability
Excellent UV resistance
Excellent resistance to high-energy radiation (gamma rays and X-rays)
Low flammability, reaching V0 level.


UHMW-PE
UHMW-PE has good wear resistance, low friction coefficient, corrosion resistance, better mechanical properties than PTFE, and is one of the best choices in chemical environments. It still has good performance at -200°C.

Main features of UHMW-PE:
Good wear and corrosion resistance
Good impact resistance at low temperatures
low coefficient of friction
very low water absorption
Good resistance to high-energy radiation (X-rays and gamma-rays)


Anti-static plastic

Our anti-static material has good anti-static performance, does not drop powder, and the internal anti-static index is consistent with the surface.
self-lubricating material
Based on our deep understanding of materials, we can choose different materials according to different working conditions to suit different working conditions.


Ball material

The balls of our bearings are made of the following materials:
Zirconia, an extremely strong ceramic material that can withstand extremely high temperatures and most chemicals. These balls are used in high temperature and highly corrosive environments.
Silicon nitride
You can also choose other materials, such as glass, stainless steel and so on.