Why choose HONY plastic Nylatron® MC901 H.S. PA6 nylon 6

What is Nylatron® MC901 HS Pa6 ?

Nylatron® MC901 HS PA6 is a heat stabilized nylon offering long-term thermal stability to 260°F. It is blue in color and used in a variety of bearing and structural applications such as wheels, gears, and custom parts.

MC901 Blue Nylon Sheet: This modified nylon 6 has a striking orchid color, higher toughness than ordinary cast nylon, good flexibility and fatigue resistance, proving to be an ideal material for gears, racks and transmission gears.

Main characteristics: high mechanical strength, stiffness, hardness and toughness. Good aging resistance, good mechanical damping capacity, good sliding, wear resistance, good machinability, high chemical stability, resistance to organic solvents and fuels, harmless. As well as high heat resistance and non-deformability (applicable temperature range -40 degrees - 120 degrees). Nylon is one of the five engineering plastics widely used varieties.

Application: Widely used in chemical machinery, anticorrosive equipment, gear and parts blanks. Wear-resistant parts, transmission structure parts, household appliances parts, automobile parts, screw to prevent mechanical parts, chemical machinery parts, chemical equipment. Such as turbines, gears, bearings, impellers, cranks, instrument panels, drive shafts, valves, blades, silk rods, high-pressure washers, screws, nuts, seals, bobbins, sets of simple, bushing connectors, etc..

MC901 CNC machining part

MC901 cnc part

MC901 fabrication cnc part

Nylatron® MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness, and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties, and outstanding wear resistance. Due to these characteristics and properties, Nylatron® MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Material Properties

Outstanding mechanical strength, rigidity, hardness, and toughness

Excellent sliding properties and wear resistance

Excellent electrical insulation

Available Colors

Nylatron® MC 901 PA6 stock shapes come in the following colors: Blue

Applications

Bushings and Bearings

Marine Rudder Bearings

Conveyor Wear Components

Gears

Metal Replacement Applications

Pulleys

Roller Wheels

Sheaves

Wear Pads

Bearing and Wear Parts for a Wide Range Automated Equipment

Valve Seats and Seals

Typical Properties of Nylatron ® MC 901 Blue Type 6 Nylon Heat Stabilized

PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.15
	ASTM D792	lb/in³	0.042
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.6
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	7
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	12000
Tensile Modulus	ASTM D638	psi	400000
Tensile Elongation at Break	ASTM D638	%	20
Flexural Strength	ASTM D790	psi	16000
Flexural Modulus	ASTM D790	psi	500000
Compressive Strength	ASTM D695	psi	15000
Compressive Modulus	ASTM D695	psi	400000
Hardness	ASTM D785	NA	Rockwell M85 (R115)
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.4
Dynamic Coefficient of Friction	QTM 55007 (Dry vs Steel)	NA	0.2
Wear K Factor	QTM 55010	in³-min/ft-lbs-hr	100
Limiting PV	QTM 55007	psi-fpm	3000
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	5
Heat Deflection Temp	ASTM D648	°C at 264 psi	93
	ASTM D648	°F at 264 psi	200
Melting Point Temp	ASTM D3418	°C	216
	ASTM D3418	°F	420
Max Continuous Operating Temp		°C	127
		°F	260
Minimum Operating Temp		°C	-30
		°F	-22
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-°F	2.37
Flammability Rating	UL94	NA	HB
ELECTRICAL
Property	Test	Unit of Measure	Value
Dielectric Strength	ASTM D149	V/mil	500
Dielectric Constant at 1 MHz	ASTM D150	NA	3.7
Surface Resistivity	ASTM D257	ohm/square	>10^13
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No

Please refer to https://www.honyplastic.com/pa6-nylon-machined-parts/

and contact sales@honyplastic.com