| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Land,Ocean,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Duratron® T7530
Brand: Duratron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Duratron® T7530 is a compression molded, 30% carbon fiber-reinforced polyamide-imide with 1-5% PTFE that exhibits outstanding strength and stiffness in non-abrasive wear applications. Duratron® T7530 has the lowest coefficient of linear thermal expansion of all PAI materials, making it an ideal solution for applications that require exceptional dimensional stability and involve extreme temperatures.
Material Properties
Lowest coefficient of thermal expansion of all PAIs
30% carbon fiber-reinforced
Outstanding strength and stiffness in non-abrasive wear applications
Available Geometries
Duratron® T7530 PAI stock shapes encompass a range of standard sizes in the following geometries: Plate, Tubular bar
Available Colors
Duratron® T7530 PAI stock shapes come in the following colors: Black
Key Properties
Thermal Performance to 500°F (260°C) Continuous Use Temp
Carbon Reinforced Grade
Higher Strength and Modulus
Exceptional Creep Resistance
Good Fatigue Resistance
Excellent Dimensional Stability
Lowest Coefficient of Linear Thermal Expansion CLTE of PAI Grades – Close to Steel
Compression Molded Grade Offers Larger Shapes & Thicker Cross Sections
Limitations
Duratron® T PAI Grade Materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids
Applications
Aerospace Components
Gears
High Strength High Pressure Structural Components
Housings
Impellers
Metal Replacement
Oil & Gas Components
Pistons
Shrouds
Sliding Compressor & Pump Vanes
Typical Properties of Duratron ® T 7530 Carbon Filled PAI Compression Molded
DETAIL Description Value Material Type Imidized Amorphous Thermoplastic Chemical Name PAI Polyamide-imide Trade Name Duratron® T7530 PAI Additives Carbon Filled Color Black Manufacturer Mitsubishi Chemical Advanced Materials
PHYSICAL Property Test Unit of Measure Value Density ASTM D792 g/cm³ 1.51 ASTM D792 lb/in³ 0.055 Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.3 Water Absorption, Saturation, Immersion ASTM D570 % by wt. 1.5 MECHANICAL Property Test Unit of Measure Value Tensile Strength ASTM D638 psi 12500 Tensile Modulus ASTM D638 psi 730000 Tensile Elongation at Break ASTM D638 % 2.6 Flexural Strength ASTM D790 psi 18000 Flexural Modulus ASTM D790 psi 1000000 Compressive Strength ASTM D695 psi 43000 Compressive Modulus ASTM D695 psi 971000 Hardness ASTM D785 NA Rockwell E90 IZOD Impact-Notched ASTM D256 ft-lb/in 0.7 Dynamic Coefficient of Friction QTM 55007 (Dry vs Steel) NA 0.22 Wear K Factor QTM 55010 in³-min/ft-lbs-hr 112 Limiting PV QTM 55007 psi-fpm 43000 THERMAL Property Test Unit of Measure Value Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./℉ 0.9 Max Continuous Operating Temp ℃ 260 huashidu5 500 Minimum Operating Temp ℃ -200 ℉ -328 Thermal Conductivity ASTM C117 BTU-in/ft²-hr-℉ 3.6 Flammability Rating UL94 NA V-0
COMPLIANCE Description Value FDA No USDA No NSF No 3-A Dairy No Canadian Food Inspection Agency No USP Class VI No OTHER Description Value UV Resistant Yes
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now