| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Duratron® T4503
Brand: Duratron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Compression-molded Duratron® T4503 PAI shapes possess good electrical insulation properties and excellent dimensional stability qualities. This grade is commonly used for dies and patterns of formed metal parts or as thermal insulators. Similar in composition to Duratron® T4203 PAI, it offers high toughness and impact strength for extreme applications where large geometries are required such as dies, or as thermal insulators.
Material Properties
Available in larger geometries
Excellent toughness and impact strength
Good electrical insulation
Excellent dimensional stability
Available Geometries
Duratron® T4503 PAI stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate, Tubular bar
Rod
Plate
Tubular bar
Key Properties
Thermal Performance to 500°F (260°C) Continuous Use Temp
Creep Resistant
Excellent Wear Properties
High Outstanding Electrical Properties
Highest Impact Strength of all PAI Grades
Compression Molded Grade Offers Larger Shapes & Thicker Cross Sections
Limitations
Duratron® T PAI Grade Materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids
Applications
Bushings & Bearings
High Temp High Strength Electrical Housings
Oil & Gas Down Hole Components
Thrust Washers
Wear Rings
Typical Properties of Duratron ® T4503 PAI Compression Molded
DETAIL Description Value Material Type Imidized Amorphous Thermoplastic Chemical Name PAI Polyamide-imide Trade Name Duratron® T4503 PAI Additives Unfilled Electrical Grade Color Dark Yellow Manufacturer Mitsubishi Chemical Advanced Materials
PHYSICAL Property Test Unit of Measure Value Density ASTM D792 g/cm³ 1.4 ASTM D792 lb/in³ 0.051 Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.35 Water Absorption, Saturation, Immersion ASTM D570 % by wt. 1.7 MECHANICAL Property Test Unit of Measure Value Tensile Strength ASTM D638 psi 18000 Tensile Modulus ASTM D638 psi 500000 Tensile Elongation at Break ASTM D638 % 8 Flexural Strength ASTM D790 psi 18000 Flexural Modulus ASTM D790 psi 560000 Compressive Strength ASTM D695 psi 22000 Compressive Modulus ASTM D695 psi 350000 Hardness ASTM D785 NA Rockwell E80 (M119) IZOD Impact-Notched ASTM D256 ft-lb/in 1.5 Dynamic Coefficient of Friction QTM 55007 (Dry vs Steel) NA 0.3 THERMAL Property Test Unit of Measure Value Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./℉ 1.5 Heat Deflection Temp ASTM D648 ℃ at 264 psi 278 ASTM D648 ℉ at 264 psi 532 Max Continuous Operating Temp ℃ 260 ℉ 500 Minimum Operating Temp ℃ -200 ℉ -328 Thermal Conductivity ASTM C117 BTU-in/ft²-hr-℉ 1.8 Flammability Rating UL94 NA V-0 ELECTRICAL Property Test Unit of Measure Value Dielectric Strength ASTM D149 V/mil 600 Dielectric Constant at 1 MHz ASTM D150 NA 4.2 Dissipation Factor at 1 MHz ASTM D150 NA 0.031 Surface Resistivity ASTM D257 ohm/square >10^13
COMPLIANCE Description Value FDA No USDA No NSF No 3-A Dairy No Canadian Food Inspection Agency No USP Class VI No OTHER Description Value UV Resistant No Machinability 6
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now