Rulon® LR | SAINT-GOBAIN

rulon® LR is the most popular Rulon product. Used in general bearing applications and as a linear tape bearing. Low deformation under load, excellent thermal and chemical properties. Requires 35 RC or harder for mating hardware.

Rulon® LR offers low deformation and is compatible with most hardened steel substrates and acceptable with mild steel; harder mating surfaces offer optimal performance. Offering excellent chemical resistance and capable of running unlubricated up to 10,000 PV.

Rulon LR maroon bearing material is well known for its extreme versatility.

It is suitable for friction with most hard steels. It can also be used on lower hardness steels and runs better on more aggressive surfaces.

The material is extremely chemically stable. All commercial chemicals, including molten sodium and fluorine, are slightly corrosive at high temperatures and pressures.

In continuous non-lubricated operation, rulon LR bearings can withstand pv values of up to 10,000 psi*fpm.

Higher values are possible in intermittent operation.

Key Properties

Excellent for Steam, Wet, Dry & Vacuum Environments

Outstanding Chemical Resistance

Low Friction

Ideal for Harder Mating Surfaces

Maximum Pressure Velocity (continuous)(MPa x m/s): 10,000PV (.35)

Maximum Pressure PSI (Static)(MPa): 1,000 PSI (6.9)

Shaft Hardness Minimum: Rc35

Shaft Material: Steel

Limitations

Subject to Creep, Cold Flow

Tight Tolerance Applications

Applications

1、 Automatic molded bearings and components for pumps and agitators.

2、Sleeve type, flange type and thrust spacer type bearings are used in household appliances.

3、 Piston rings for automobiles

4、 Stamping, molding sealing ring insulation parts

5、 Extruded profiles are used for linear slides

6、 Machined products are used for pipe head support

7、 Molded profiles are used in wear-resistant belts and textile industry.

Typical Properties of Rulon ® LR (Maroon)