There are three types of POM 1. The normal type has no conductivity. 2: Conductive POM The conductivity coefficient is generally 10 to the power of 3 to 5. 3 Anti-static POM, anti-static coefficient 10 to the 6th to the 9th power. Good quality POM board: new material processing, uniform thickness, no bubbles, small deformation, smooth surface and bright luster. Inferior quality plates: add back material, phosphor (increase brightness), calcium carbonate (increase specific gravity), etc., with rough surface, uneven thickness, and pores. The anti-static POM coefficient is go
POM (polyoxymethylene) is a kind of thermoplastic engineering plastic with high melting point and high crystallinity that appeared in the 1960s. The working temperature ranges from minus 60 degrees to 100 degrees. Due to its high surface strength and smoothness, POM has excellent sliding properties and wear resistance. There is basically no tension in POM. It has high heat stability and chemical stability. Features: high mechanical strength, high rigidity, high hardness; excellent elasticity; good creep resistance; high impact strength even at low temperatures; very good dimensional sta
The difference between POM material and nylon material
The natural color of the dragon is ivory, and the natural color of POM is white. Polyoxymethylene plastic is another excellent resin variety developed after nylon, with excellent comprehensive properties. Polyoxymethylene has good resistance to solvents, oils, weak acids and weak alkalis. Polyoxymethylene has high hardness and rigidity, high resistance to creep and stress relaxation, excellent wear resistance, self-lubrication, and fatigue The scientific name of polyoxymethylene polyoxymethylene (POM) Polyoxymethylene is a linear polymer with no side chains, high de
Why is POM material called Saigang? What is the reason?
The main reason is that the hardness of POM is relatively high. The Rockwell hardness reaches D80-85Z, which is a high-hardness material in engineering plastics. In terms of hardness, it is comparable to steel, and in other processing properties. , POM is also good, making some spare parts, bearings, gears, etc., is also good. Nowadays, engineering plastics is an emerging industry, many of which can replace steel, and have properties that metal materials do not have, such as insulation, wear resistance, acid and alkali resistance, etc.
POM has high strength and rigidity, good elasticity, and good wear resistance. Its mechanical properties are excellent, the specific strength can reach 50.5MPa, and the specific stiffness can reach 2650MPa, which is very close to metal. The mechanical properties of POM change little with temperature, and the change of copolymerized POM is slightly larger than that of homopolymerized POM. The impact strength of POM is higher, but the conventional impact is not as good as ABS and PC; POM is sensitive to notches, which can reduce the impact strength by as much as 90%. The fatigue strength o
What is the difference between imported POM rods and domestic POM rods
Compared with the domestic POM, the imported POM rod has a purer material, less internal impurities, no pores inside the material, and stress relief. Please send inquiry and drawing to sales@honyplastic.com
Nylon was developed by the outstanding American scientist Carothers (Carothers) and a scientific research team under his leadership. It was the first synthetic fiber to appear in the world. The emergence of nylon has given a new look to textiles. Its synthesis is a major breakthrough in the synthetic fiber industry and a very important milestone in polymer chemistry. main products With the miniaturization of automobiles, the higher performance of electronic and electrical equipment, and the acceleration of the process of lightweight mechanical equipment, the demand for nylon will
How to process nylon rods with ordinary cars, and how fast is the speed?
Ordinary car fixtures are strong metal jaws, so you first need to consider auxiliary fixtures and center positioning (large parts processing can be ignored); The tool can be selected from high-speed steel tools, but the cutting tool's edge seems to be a bit technical (I remember it is the outer end face in a trance, I can't remember the entering angle, hehe, I won't do it for a long time); Coolant is necessary, otherwise the nylon rod will be deformed or damaged due to high temperature and heat during high-speed processing; The machining spindle speed seems to be abo
How to ensure the size when processing nylon materials on the machine
Water absorption will affect the size and accuracy of the parts to a certain extent, especially the thickening of thin-walled parts; water absorption will also affect the mechanical (strength, creep) and electrical properties of nylon materials due to the influence of water absorption. ,nylon Please send inquiry and drawing to sales@honyplastic.com
Performance comparison of MC nylon and UHMWPE
In the properties of mc nylon and ultra-high molecular weight polyethylene, the similarities are: wear resistance, corrosion resistance, strength High, impact resistant and light weight. Both can be used with mechanical parts. But in comparison, there are still differences. In terms of wear resistance, UHMWPE is superior to mc nylon. In terms of corrosion resistance, UHMWPE is also superior to mc nylon. In the use temperature, mc nylon can be used for a long time at 120 degrees, while the long-term use temperature of ultra-high molecular weight polyethylene is below 80 degrees, an
Both are nylon but there is a difference 1.MC nylon (MC NYLON) MC nylon English name: Monomer casting Nylon, Chinese name: monomer-cast nylon, is a widely used engineering plastic, covering almost all industrial fields. It is a casting product formed by using anionic polymerization technology to pour molten caprolactam monomer with a catalyst in a mold of various shapes for reaction under normal pressure. The molecular weight of MC nylon is as high as 70,000 to 100,000, which is three times that of general nylon 6 and nylon 66. Therefore, its comprehensive mechanica
Which other materials such as nylon, MC nylon, POM, etc. have high strength?
The strength of MC nylon seems to be good, better than injection molded POM can only be used as a pinion, that is, POM can't keep up with PA in terms of strength, and of course its toughness cannot be compared with nylon. As for the toughness of MC nylon, I don't know. Please send inquiry and drawing to sales@honyplastic.com
Nylon is a thermoplastic plastic. It can only be processed by injection molding machines, and injection molds are used to process nylon products. It cannot be processed with a hydraulic machine. Please send inquiry and drawing to sales@honyplastic.com
How to process nylon on CNC lathe
The cutting plastic is similar to aluminum alloy. The cutting tool requires sharp, very sharp, large relief angle, super large rake angle, and the rake surface should be polished as much as possible. Compared with aluminum alloy, the speed should not be too high and the feed rate should be large. It is also possible to process plastic with aluminum alloy special turning blades. Don`t move the knife too slowly, otherwise the plastic will melt Please send inquiry and drawing to sales@honyplastic.com
MC nylon rods are also called cast nylon rods: Monomer casting nylon in English and Monomer casting nylon in Chinese. Under normal pressure, the molten raw material caprolactam monomer C6H11NO is used as a catalyst with a basic substance, together with activators and other additives to make monomers to be polymerized, and directly injected into a mold preheated to a certain temperature. The material is quickly polymerized in the mold and condensed into a tough solid blank, and then processed by the relevant process to obtain the predetermined bar. "Using plastic to replace steel, with ex
MC nylon is also called cast nylon. It uses the molten raw material caprolactam monomer C6H11NO as a catalyst with an alkaline substance as a catalyst, together with activators and other additives, to make the monomer to be polymerized, and it is directly injected and preheated to a certain level. In the temperature mold, the material will be polymerized quickly in the mold and condensed into a tough solid embryo, and then processed by the relevant process to obtain the predetermined product. As one of the engineering plastics, MC nylon products "replace steel with plastic and have excellent p
PTFE or MC nylon, which is more wear-resistant
Under normal temperature or low temperature environment, whether with or without lubricant, UHMWPE is much better than MC nylon in abrasion resistance. However, MC nylon has better abrasion resistance in high temperature environments, because the heat distortion temperature of ultra-high molecular weight polyethylene does not exceed 80 ℃, and it is actually used in abrasion-resistant conditions, the temperature is higher, the ultra-high molecular weight polyethylene Soften, abrasion resistance is greatly reduced Please send inquiry and drawing to sales@honyplastic.co
mc nylon mechanical properties
Its friction coefficient is 8.8 times lower than steel and 8.3 times lower than copper, and its specific gravity is only one-seventh of copper. MC nylon can directly replace the original copper, stainless steel, aluminum alloy and other metal products. MC nylon pulleys, sliders, gears, worm wheels, supporting wheels, supporting wheels, walking wheels, water pump impellers, bushings, bearings, pins, piston valve bodies, rubber baffles, pulleys, rotating wheels, bars produced over the years , Pipes, plates, etc., not only better replace the corresponding metal products, but also enable users to
What is the difference between PA66 nylon material and MC901 nylon use
MC nylon is also called cast nylon. It uses the molten raw material caprolactam monomer C6H11NO as a catalyst with an alkaline substance as a catalyst, together with activators and other additives, to make the monomer to be polymerized, and it is directly injected and preheated to a certain level. In the temperature mold, the material will be polymerized quickly in the mold and condensed into a tough solid embryo, and then processed by the relevant process to obtain the predetermined product. As one of the engineering plastics, MC nylon products "replace steel with plastic and have excellent p
The main characteristics of nylon rod
High mechanical strength, stiffness, hardness, toughness, good aging resistance, good mechanical damping ability, good sliding properties, excellent wear resistance, good machining performance, when used for precise and effective control, no creeping phenomenon, anti-wear Good performance, good dimensional stability Please send inquiry and drawing to sales@honyplastic.com
Ordinary nylon has good mechanical properties and plasticity. It will be much better as long as you lightly hold it against the incoming car. However, it is impossible to ensure the straightness in the ideal state. It will definitely deform more or less, depending on how much you require! If you want to ensure that you are in the best condition, I suggest using nylon 66+30GF, which has good rigidity and has a lot more strength than ordinary nylon; please refer to the following information for your reference in detail: There are the following types of nylon 66: 1: Nylon 66
What are the models of imported nylon sheets
Imported plastic material series. Imported PEEK board 201311 What are the models of imported nylon sheets? 201308 Waterproof performance 201325 Brown gray PEEK111111-04 Please send inquiry and drawing to sales@honyplastic.com
What are the diameters of nylon rods
It is estimated that there are from 5 mm to 500 mm, and it also depends on the length of your processing Please send inquiry and drawing to sales@honyplastic.com
Are industrial nylon rods resistant to high temperatures?
Nylon rods cannot withstand high temperature 400 degrees There are modified plastics that can withstand high temperatures above 400 degrees, and there are coatings that can withstand high temperatures of 1800 degree Please send inquiry and drawing to sales@honyplastic.com
Tel: 86-852-34604012
Whatsapp: 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
