| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Land,Ocean,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: TECAPEI PEI Polyetherimide
Brand: TECAPEI
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Polyetherimide or PEI material is an amorphous thermoplastic with high mechanical strength and rigidity. PEI polymer is extruded by Ensinger in sheet and rod shapes using Sabic's Ultem® resin. Unfilled PEI thermoplastic is translucent and amber in color with exceptional mechanical, thermal and electrical properties. In filled grades, the addition of glass fiber reinforcement, coupled with Ensinger's proprietary extrusion techniques, provides users with a polyetherimide offering that has both greater tensile strength and rigidity, while also improving dimensional stability.PEI Ultem® plastic has similar characteristics to the polyarylsulphones, while simultaneously offering significant advantages. Polyetherimides has a remarkably high creep resistance over a wide temperature and a high permanent operating temperature. Furthermore, very good resistance to hydrolysis, along with dimensional stability rounds out the portfolio of polyetherimide properties.Pei Ultem Sheet Rod
PEI MATERIAL PROPERTIES AND SPECIFICATION
High permanent operating temperature (170°C)
High mechanical strength
High rigidity
High creep resistance over a wide temperature range
High dimensional stability
Very good resistance to hydrolysis (suitable for repetitive steam sterilization)
Good electrical insulation
Good radiation resistance
Good chemical resistance to chlorine and caustic/acidic cleaning agents
Ensinger's PEI plastic material offering is manufactured and distinguished by the trade name TECAPEI. The Ensinger TECAPEI family offers the following modifications:
TECAPEI - PEI unfilled
TECAPEI GF30 - PEI with 30% glass fiber reinforcement
TECAPEI MT - PEI for medical applications, biocompatible
Ensinger is a supplier of Polyetherimide shapes such as:
PEI rod
PEI sheet
Ultem® is a registered trademark of Saudi Basic Industries Corporation (Sabic).
Engineering Plastic Ultem Pei Sheet TYPICAL PEI APPLICATIONS
Electronic industries: coils and fuses
Ultem Pei 1000 Sheet Aerospace industries: components for antenna constructions and components for interior equipment
TECAPEI™ natural (Sabic Ultem ® 1000 series)
UNFILLED PEI
TECAPEI natural (PEI) is an unreinforced polyetherimide, suitable for contact with foods, that exhibits high mechanical strength and rigidity. The characteristic profile includes very good hydrolysis resistance, and dimensional stability, combined with a relatively high long term service temperature.
Ultem 1000 Chemical designation
PEI (Polyetherimide)
Color
Amber transparent
Alternative colors available
black
Density
1.27 g/cm3
MAIN FEATURES
high dielectric strength
inherent flame retardant
low smoke emissions
easily machinable to tight tolerance
high thermal and mechanical capacity
flame retardant according to UL94 V-0
TARGET INDUSTRIES
aircraft and aerospace technology
automotive industry
electronics
medical technology
semiconductor technology
food engineering
food processing
TECAPEI™ GF30 Nat (Sabic Ultem®2300 Series)
PEI FILLED WITH 30% GLASS FIBER
This is a special 30% glass fiber reinforced PEI, manufactured by Ensinger under the tradename TECAPEI GF30 natural. In comparison to unfilled PEI (TECAPEI natural), PEI GF30 demonstrates high rigidity, very high mechanical strength, as well as extremely good dimensional stability, and good resistance to high energy radiation. These properties make PEI with 30% glass fibers suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions.
Chemical designation
PEI (Polyetherimide)
Color
brown-beige
Density
1.51 g/cm3
MAIN FEATURES
high thermal and mechanical capacity
high dielectric strength
excellent strength and stiffness
excellent tensile strength
easy to machine
inherent flame resistance
TARGET INDUSTRIES
aircraft and aerospace technology
electrical engineering
automotive industry
mechanical engineering
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now