| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Duratron®U2100 PEI
Brand: Duratron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Duratron® U2100 PEI Polyetherimide shapes are 10% glass-reinforced, giving them greater rigidity and dimensional stability over Duratron® U1000, as well as a low coefficient of linear thermal expansion. With an excellent strength-to-weight ratio and high tensile strength, this grade is ideal for for semiconductor and electronics applications.
Material Properties
10% glass reinforced for added rigidity and dimensional stability
High strength
Excellent flame and heat resistance
Consistent dielectric properties over wide frequency range
Resistant to hydrolysis and acidic solutions
Suitable for repeated autoclaving
Common Duratron® U PEI Applications
Aircraft components
Analytical instrumentation Components
Electrical Connectors
Electrical Housings
Insulators
Manifolds
Medical device components
Semiconductor components
Structural Components
Available Geometries Duratron® U2100 PEI stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate Available Colors Duratron® U2100 PEI stock shapes come in the following colors: Amber-Translucent Typical Properties of Duratron ® U 2100 PEI 10% Glass
| DETAIL | |||
| Description | Value | ||
| Material Type | Imidized Amorphous Thermoplastic | ||
| Chemical Name | PEI Polyetherimide | ||
| Trade Name | Duratron®U2100 PEI | ||
| Additives | 10% Glass | ||
| Color | Tan | ||
| Manufacturer | Mitsubishi Chemical Advanced Materials | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.34/TD> |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.21 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.2 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 16800 |
| Tensile Modulus | ASTM D638 | psi | 650000 |
| Tensile Elongation at Break | ASTM D638 | % | 6 |
| Flexural Strength | ASTM D790 | psi | 23000 |
| Flexural Modulus | ASTM D790 | psi | - |
| Compressive Strength | ASTM D695 | psi | 24000 |
| Hardness | ASTM D785 | NA | Rockwell M114 / R127 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.6 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.8 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 207 |
| ASTM D648 | °F at 264 psi | 405 | |
| Max Continuous Operating Temp | °C | 171 | |
| °F | 340 | ||
| Minimum Operating Temp | °C | -50 | |
| °F | -58 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.22 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 6.3 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.0014 |
| Surface Resistivity | EOS/ESD S11.11 | ohm/square | > 10^13 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now