| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Duratron® T4501 PAI
Brand: Duratron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
Duratron® T4501 PAI possesses high compressive strength and excellent wear resistance, making it a great performer in general purpose wear and friction applications. This grade is similar in composition to Duratron® T4301, offering a very high flexural modulus and exhibiting little-to-no stickslip, and is able to endure harsh thermal, chemical, and stress conditions. Duratron® T4501 PAI is a reliable solution for parts requiring larger geometries and high compressive strength.
Material Properties
Available in larger geometries
High compressive strength and flexural modulus
Low wear and little-to-no stickslip
Suitable for harsh thermal, chemical, and stress conditions
Available Geometries
Duratron® T4501 PAI stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate, Tubular bar
Available Colors
Duratron® T4501 PAI stock shapes come in the following colors: Black
Key Properties
Thermal Performance to 500°F (260°C) Continuous Use Temp
Excellent Wear Resistance
High Flex & Compressive Modulus
Ideal high Pressure and Velocity Bearing Applications
Low Coefficient of Friction (COF)
Compression Molded Grade Offers Larger Shapes & Thicker Cross Sections
Limitations
Duratron® T PAI Grade Materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids
Applications
Aerospace Components
Bushings & Bearings
Gears
Metal Replacement
Oil & Gas Components
Rollers
Thrust Washers
Wear Rings
Typical Properties of Duratron ® T 4501 PAI Compression Molded
| DETAIL | |
| Description | Value |
| Material Type | Imidized Amorphous Thermoplastic |
| Chemical Name | PAI Polyamide-imide |
| Trade Name | Duratron® T4501 PAI |
| Additives | Bearing Grade Additives |
| Color | Black |
| Manufacturer | Mitsubishi Chemical Advanced Materials |
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.45 |
| ASTM D792 | lb/in³ | 0.052 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.3 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.5 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 9000 |
| Tensile Modulus | ASTM D638 | psi | 500000 |
| Tensile Elongation at Break | ASTM D638 | % | 3 |
| Flexural Strength | ASTM D790 | psi | 12000 |
| Flexural Modulus | ASTM D790 | psi | 550000 |
| Compressive Strength | ASTM D695 | psi | 20000 |
| Compressive Modulus | ASTM D695 | psi | 395000 |
| Hardness | ASTM D785 | NA | Rockwell E70 (M106) |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.5 |
| Dynamic Coefficient of Friction | QTM 55007 (Dry vs Steel) | NA | 0.2 |
| Wear K Factor | QTM 55010 | in³-min/ft-lbs-hr | 4.5 |
| Limiting PV | QTM 55007 | psi-fpm | 22500 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./℉ | 2 |
| Heat Deflection Temp | ASTM D648 | ℃ at 264 psi | 279 |
| ASTM D648 | ℉ at 264 psi | 534 | |
| Max Continuous Operating Temp | ℃ | 260 | |
| ℉ | 500 | ||
| Minimum Operating Temp | ℃ | -200 | |
| ℉ | -328 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-℉ | 3.7 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 5.4 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.042 |
| Surface Resistivity | ASTM D257 | ohm/square | >10^13 |
| COMPLIANCE | |
| Description | Value |
| FDA | No |
| USDA | No |
| NSF | No |
| 3-A Dairy | No |
| Canadian Food Inspection Agency | No |
| USP Class VI | No |
| OTHER | |
| Description | Value |
| UV Resistant | Yes |
| Machinability | 6 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now