Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Brand:TECAPEEK
Min. Order:1 Kilogram
Model No:TECAPEEK® CM XP109 BLACK PEEK
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
TECAPEEK CM XP109 black PEEK MOD. 30% CARBON FIBRE AND 15% PTFE This compression moulded material is a Victrex® PEEK polymer modified with 30% carbon fibre and 15% PTFE for improved sliding and wear properties, and increased strength. FACTS Chemical...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron® 1000 IM PEEK
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:100
Ketron® 1000 Injection Molded (IM) Polyetheretherketone PEEK shapes offer excellent chemical, corrosion, and wear resistance across a wide range of operating temperatures. Ideal for applications within the oil and gas industry, Ketron® 1000 IM PEEK...
Brand:TECAPEEK
Min. Order:1 Kilogram
Model No:TECAPEEK ® PVX PEEK
Transportation:Ocean,Air,Express,Land
Packaging:Export package
Supply Ability:1000
TECAPEEK PVX black is a modified PEEK material using Victrex® PEEK 450 or Solvay KetaSpire® KT-820 and is classified in the same performance category as Victrex® PEEK™ FC30. TECAPEEK PVX black was developed especially for bearing and sliding...
Brand:TECAPEEK
Min. Order:1 Kilogram
Model No:TECAPEEK® UD blue
Transportation:Ocean,Land,Air,Express
TECAPEEK UD blue multi-detectable plastic has the highest temperature and chemical resistance capability of all of Ensinger's Ultra-detectable Products. With a heat deflection temperature over 300°F, and excellent resistance to a wide range of...
Brand:TECAPEEK
Min. Order:1 Kilogram
Model No:TECAPEEK® natural
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
Polyetheretherketone (PEEK) - TECAPEEK natural is a high performance, high temperature, semi crystalline thermoplastic manufactured by Ensinger and may use Victrex® PEEK 450 or Solvay Ketaspire® KT-820 polymer. The most well known and important...
Brand:SustaPEEK
Min. Order:1 Kilogram
Model No:SustaPEEK MOD black rod
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
The SustaPEEK MOD family of materials is based on polyetheretherketone resin. This semi-crystalline advanced material exhibits a unique combination of high mechanical properties, temperature resistance and excellent chemical resistance making it the...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron® CM CA30
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
Ketron® CM CA30 PEEK is a compression molded, 30% carbon fiber-reinforced polyetherether ketone that exhibits outstanding impact, corrosion, chemical, and wear resistance. With a significantly reduced thermal expansion, optimum load carrying...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron® CM GF30 PEEK
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
Ketron® GF30 Polyetheretherketone PEEK is a compression molded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron® CA30 PEEK
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:HONYPLAS-PEEK 30CF
Transportation:Ocean,Land,Air,Express
Packaging:Export carton pallet
Supply Ability:Enough
HONYPLAS®PEEK 30CF have higher mechanical strength and rigidity, the tensile strength is as high as 284MPa, which is only slightly lower than that of aluminum alloy, and its specific strength is as high as 206MPa, which is much higher than that of...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron® GF30 PEEK
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
Ketron® GF30 Polyetheretherketone PEEK is an extruded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has a...
Brand:SustaPEEK
Min. Order:1 Kilogram
Model No:SustaPEEK MOD black
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
SustaPEEK MOD black PEEK The SustaPEEK MOD family of materials is based on polyetheretherketone resin. This semi-crystalline advanced material exhibits a unique combination of high mechanical properties, temperature resistance and excellent chemical...
Brand:GEHR
Min. Order:1 Kilogram
Model No:GEHR PEEK-30GF
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:1000
The material PEEK-30GF is a variant of PEEK modified with 30 % glass fibres. This modification significantly increases the surface hardness and heat deflection temperature compared to the already high values of the unreinforced standard type. The...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron® VMX Food Grade PEEK
Transportation:Ocean,Land,Air,Express,Others
Packaging:Export package
Supply Ability:100000
Ketron® VMX Food Grade PEEK an EU 10/2011 and compositional FDA 21 CFR § 177.2415 compliant material that offers extreme dimensional stability, and high strength and temperature resistance. Visual, metal, and x-ray detectable, Ketron® VMX Food Grade...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:HONYPLAS-PEEK 30GF
Transportation:Ocean,Land,Air,Express
Packaging:Export carton pallet
Supply Ability:Enough
HONYPLAS®PEEK 30GF 30% Glass fibre filled PEEK is a material with dramatically increased thermal bearing strength and great creep and radiation resistance. The glass fibre as a filler added to the Virgin PEEK makes it highly resistant at higher...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:PEEK monofilament multifilament and PEEK staple fiber
Transportation:Ocean,Land,Air,Express,Others
Packaging:Export package
Supply Ability:100000
Polyether ether ketone fiber is a kind of fully aromatic fiber, and there are ether bonds and ketone bonds, so that the high temperature resistance, friction resistance and corrosion resistance of the fiber are much higher than that of conventional...
Brand:Ketron
Min. Order:1 Kilogram
Model No:KETRON PEEK 1000
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:10000
Ketron® PEEK 1000 (Virgin, Unfilled PEEK) offers chemical and hydrolysis resistance similar to PPS, but can operate at higher temperatures. Virgin PEEK material offers steam and wear resistance, and can be used continuously to 480°F (250°C) and in...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:HONYPLAS-PEEKGF30
Transportation:Ocean,Land,Air,Express
Packaging:Export carton pallet
Supply Ability:Enough
Productivity:50000 pcs per day
Peek Glass Fiber Filled Sheet is composed of different chemical polymer compounds with some macromolecular main chains, so it is the most important variety of polyaryl ether ketone. It can be said that glass fiber reinforced peek has more...
Brand:Ketron
Min. Order:1 Kilogram
Model No:Ketron®High Performance PEEK TX
Transportation:Ocean,Land,Air,Express,Others
Packaging:Export package
Supply Ability:100000
Ketron®TX is an internal lubrication grade PEEK compliant with EU 10/2011 and FDA. This premium grade has better wear and friction properties than virgin PEEK. Ketron® TX PEEK components have a lower CoF than standard PEEK, allowing for increased...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:Custom PEEK blocks sheet
Transportation:Ocean,Land,Air,Express,Others
Packaging:Export package
Supply Ability:10000
PEEK material (polyetheretherketone) is a high-performance semi-crystalline engineering thermoplastic with excellent corrosion resistance, very low moisture absorption, good fire resistance, excellent mechanical strength over a wide temperature...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:PEEK Film (Polyetheretherketone) Film sold
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:10000
PEEK film offers an outstanding range of physical, thermal, chemical & radiological properties. PEEK is a high performance semi-crystalline thermoplastic. PEEK's characteristics include high temperature performance, excellent wear properties,...
Brand:Ketron® TF20 PEEK SP
Min. Order:1 Kilogram
Model No:Ketron® TF20 PEEK SP
Transportation:Ocean,Land,Air,Express,Others
Packaging:Export package
Supply Ability:1000
Ketron® TF20 PEEK SP polyetheretherketone Ketron® TF20 SP is a PTFE-filled PEEK grade that offers improved frictional properties, a considerably reduced coefficient of friction, and higher pressure-velocity capabilities. Ketron® TF20 PEEK SP...
Brand:Ketron HPV PEEK
Min. Order:1 Kilogram
Model No:Ketron HPV PEEK
Transportation:Ocean,Land,Air,Express,Others
Packaging:Export carton
Supply Ability:1000
KETRON® Extruded HPV PEEK (BEARING GRADE) - Carbon fiber reinforced with graphite and PTFE lubricants, with the lowest coefficient of friction and the best machinability for all PEEK grades. An excellent combination of low friction, low wear, high...
Brand:HONYPLAS
Min. Order:1 Kilogram
Model No:HONYPLAS-PEEK
Transportation:Ocean,Land,Air,Express
Packaging:Export package
Supply Ability:100000
Productivity:100000
HONYPLAS®peek Polyetheretherketone is a special engineering plastic with excellent properties such as high temperature resistance, self-lubricating, easy processing and high mechanical strength. It can be manufactured and processed into various...
HONYPLAS®PEEK Sheet Rod can be used at very high temperatures (approximately +260 °C) and has extraordinary mechanical strength, toughness, hardness, flexural strength and torsional strength. PEEK Shows excellent chemical resistance, good dielectric properties up to 260°C and Good resistance to various radiations (ultraviolet rays will only cause slight pan yellow). PEEK has UL94 self-extinguishing performance.PEEK (polyether ether ketone) plastic materials are aromatic crystalline thermoplastic polymer materials, with high mechanical strength, high temperature resistance, impact resistance, flame retardant, acid and alkali resistance, hydrolysis resistance, wear resistance, fatigue resistance, irradiation resistance and good electrical properties
HONYPLAS®PEEK is currently divided into two categories, pure resin and filler modified two, pure resin is divided into industrial grade and food grade and medical grade profiles; filler is divided into: plus glass fiber, plus graphite, plus PTFE, plus carbon fiber and plus mineral modified reinforced; without filler and content, the performance and application of the material also has a large difference.
Pure resin PEEK sheet,HONYPLAS®PEEK unfilled industrial grade contains trace elements harmful to humans will exceed the standard, only suitable for mechanical parts processing applications; food-grade PEEK sheet, due to the high purity, less harmful substances to humans, and high temperature and wear, the release of gas / powder, will not be harmful to humans; and medical-grade PEEK sheet, due to the biocompatibility of raw materials, can be suitable for medical Surgical devices, can also be implanted in the human body as a sliding part.
HONYPLAS®PEEK filler grade PEEK sheet, in order to improve the deficiencies of pure resin in some specific properties, the use of different areas of application, such as glass fiber 30% filled PEEK sheet, is to improve the hardness of the profile, wear/load resistance and heat resistance performance; plus graphite PEEK sheet, is to improve the sliding properties of the profile, reduce the coefficient of friction of objects in contact with it, to improve the service life of the product; Add PTFE, is also to improve the wear resistance of the profile, reduce the coefficient of friction, but also to enhance the toughness of the profile; add carbon fiber 30% PEEK sheet, is to improve the friction properties and mechanical strength of the material, but also have a high degree of heat-resistant dimensional stability; add mineral-filled PEEK sheet, is currently also to enhance the hardness and wear resistance.
Polyetheretherketone is a special engineering plastic with excellent properties such as high temperature resistance, self-lubricating, easy processing and high mechanical strength. It can be manufactured and processed into various mechanical parts, such as automotive gears, oil screens, and shift start plates,aircraft engine parts, automatic washing machine wheels, medical equipment parts, etc.
Name: HONYPLAS®PEEK Polyether etherketone
Colors include: Black, natural color
Types: Rods, Plates,Tubs,Films,ESD antistatic PEEK
HONYPLUS®PEEK sheet rod Size | ||
Name | Thickness diameter (mm) | Width x Length (mm) |
PEEK sheet | 1mm to 40mm | 600 x 1200 mm |
| 1mm to 40mm | 1250x1000mm |
PEEK rod | 1mm to 100mm | 1000mm |
Polyetheretherketone Grades include: PEEK +30% Glass Fiber
Virgin PEEK Sheet Feature
1: Corrosion resistance, anti-aging
2: Solubility resistance;
3: High temperature, high frequency, high voltage performance conditions
4: Both toughness and rigidity;
5 Dimensions require precise conditions
6: Radiation resistance, wear resistance, corrosion resistance Conditions
7: Water resistance
8: Lightweight instead of metal as optical fiber components
9: Good wear resistance, anti-static electrical insulation performance;
10: High mechanical strength requirements
11: Low smoke and gas emissions.
The main application fields of PEEK Sheet Rod:
the automobile and other (including aviation) transportation markets account for about 50% of the consumption of PEEK resin, semiconductor manufacturing equipment accounts for 20%, general mechanical parts and components such as compressor valves account for 20%, medical equipment and analytical instruments, etc. 10% of the market.
1. Transportation machinery such as automobiles
The growth of PEEK resin in the European market is particularly rapid in the auto parts market, especially parts around the engine, transmission parts, steering parts, etc. PEEK plastics are used to replace some traditional high-priced metals as manufacturing materials. As the automotive industry adapts to miniaturization, lightweight and cost reduction requirements, the demand for PEEK resin will continue to grow. There are 44 parts of a European model that use PEEK plastic instead of traditional metal products.
2. IT manufacturing field
Semiconductor manufacturing and electronic and electrical industries are expected to become another growth point for the application of PEEK resin. In the semiconductor industry, in order to achieve high functionality and low cost, silicon wafers are required to be larger in size and more advanced in manufacturing technology. Low dust, low gas emission, low ion dissolution, and low water absorption are requirements for various equipment materials in the semiconductor manufacturing process. Special requirements, this will be the place where PEEK resin will show its talents.
3. The field of office machinery parts
For the separation claws of copiers, special heat-resistant bearings, chains, gears, etc., when PEEK resin is used instead of metal as their material, the parts can be lightweight, fatigue-resistant, and can achieve oil-free lubrication.
4. Field of wire coating
The PEEK coating has good flame retardancy, and without any flame retardant, its flame retardancy level can reach UL94 V-0 level. PEEK resin also has the advantages of peel resistance and radiation resistance (109 rad), so it is used in special wires in military and nuclear energy and other related fields.
5. Plates, bars and other fields
In the application process of PEEK in some special fields, it often encounters the phenomenon of small quantity and many varieties. At this time, it is very beneficial to use rods, plates and other profiles for machining and manufacturing.
6. Fiber field
PEEK fiber (including monofilament) industrial filter cloth, industrial brush and other products. In the field of composite materials, the charm of PEEK fiber lies in its thermoplasticity and high temperature resistance. In addition to heat resistance, the attractiveness of industrial filter cloths and industrial brushes lies in their chemical resistance and abrasion resistance.
7. Field of medical analysis equipment
Because PEEK can withstand repeated autoclaving, it can be used in the manufacture of endoscope parts, dental descaling devices, etc. in medical devices. In addition, due to the high strength and low dissolution of PEEK, it has been used in liquid chromatography columns, tubes, accessories, etc. for instrumental analysis. Moreover, because PEEK has good compatibility with the human body, it has successfully replaced traditional titanium metal as an artificial bone material
PEEK Polyetheretherketone products :
Bearing shell
Piston ring
Valve seat
transmission
Sealing ring
Aviation
Gear
Pump vane
Accessories
Plug connector for chromatography
Wafer carrier
Semiconductor industry
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.