| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: SUSTAPEI GF 30 (ULTEM™ 2300)
Brand: SUSTAPEI
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
SUSTAPEI GF 30 (Ultem™ 2300) is 30% glass reinforced and provides enhanced stiffness, strength and dimensional stability for structural applications.
Characteristics
High heat deflection temperature
High flame retardant
Very low smoke development
very high stiffness, tensile strength and hardness over a broad temperature range
high dimensional stability under heat
Key Properties
Higher HDT than Unfilled PEI
Higher Strength & Stiffness than Unfilled PEI
Limitations
Chemical Resistance to Organic Solvents and Aromatic Hydrocarbons (includes many oils, fuels and greases)
Applications
Fluid handling manifolds and connectors
Electronic / electrical insulators
Analytical instrumentation
Medical devices
Aircraft components
Semiconductor components
Typical Properties of SustaPEI GF 30 ULTEM ® 2300
| Description | Value | ||
| Material Type | Amorphous Thermoplastic | ||
| Chemical Name | PEI Polyetherimide | ||
| Trade Name | SustaPEI GF 30 | ||
| Additives | 30% Glass | ||
| Color | Tan | ||
| Manufacturer | Rochling | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.51 |
| ASTM D792 | lb/in³ | 0.055 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.2 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.2 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 20,000 |
| Tensile Modulus | ASTM D638 | psi | 900,000 |
| Tensile Elongation at Break | ASTM D638 | % | 3 |
| Flexural Strength | ASTM D790 | psi | 33,000 |
| Flexural Modulus | ASTM D790 | psi | 950,000 |
| Compressive Strength | ASTM D695 | psi | 31,000 |
| Hardness | ASTM D785 | NA | Rockwell M115 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1 |
| Dynamic Coefficient of Friction | NA | 0.24 | |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.1 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 210 |
| ASTM D648 | °F at 264 psi | 410 | |
| Melting Point Temp | ASTM D3418 | °C | 228 |
| ASTM D3418 | °F | 442 | |
| Max Continuous Operating Temp | °C | 171 | |
| °F | 340 | ||
| Minimum Operating Temp | °C | -50 | |
| °F | -58 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.8 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 770 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.7 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.002 |
| Surface Resistivity | ASTM D257 | ohm/square | 10^16 |
Tel: 86-852-34604012
Whatsapp: 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now