Vespel® parts, manufactured by DuPont to your design specifications, are made from a variety of materials (polyimides, thermoplastics, composites and chemically resistant polymers). These products offer a unique combination of the physical properties and design flexibility. Parts can be designed to simplify product assembly and may reduce the need for other parts. As with metals and ceramics, Vespel® parts can successfully perform in demanding physical environments.
DuPont™ Vespel®PI (Vespel) Polyimide | Aerospace, Semiconductor, and Transportation Best Material
What is Vespel®PI (Vespel) Polyimide PI VESPEL series is a new type of high-temperature thermosetting engineering plastics, due to its ability to maintain high physical and mechanical properties in a wide range of temperatures of minus 270-400 degrees Celsius, at the same time, can be used in the air for a long period of time at -240-260 degrees C
Vespel is one of the most heat-resistant and wear-resistant of the high performance resins now available for mass production. It can be used under non-lubricated conditions (high PV value) at a height of 10 times or more without affecting other materials, and therefore will not cause any harm. Vespel is a typical representative of the polyimide (PI) plastic series.
2023 Chinaplas Rubber & Plastics Exhibition PEEK, PI, PPSU new product sharing
PEEK material related products No.01, New Energy Vehicle Flat Wire Motor PEEK Flat Wire
Acrylic Pusher Sheft from honyplastic Application in USA commercial retail giant Krog
U.S. fresh commercial retailers --- Kroger, as one of the world's largest commercial retailers, a wide range of products and excellent merchandise display is indeed a major selling point of Kroger, especially in the field of fresh, can be said to be the world's ancestor, a shopping mall into the mall, the overall design of the inside as well as the furnishings do attract every customer, can definitely be said to be "high". kroger (U.S. Kroger) is one of the famous stores with a hundred years of history. Kroger (Ameri
Acrylic Display Products from honyplastic Application in USA drug retail giant Walgreen
American drug retailer---Walgreen, as one of the world's large drug retailers, the rich product range and excellent merchandise display is indeed one of Walgreen's major selling points. Walgreen (Walgreen) is one of the world's largest drug retailers, is one of the world's top 500, was founded in 1901 in Deerfield, Illinois, the United States, mainly eng
What is PTFE Teflon? Polytetrafluoroethylene (Polytetrafluoroethylene), abbreviated as PTFE, (commonly known as "Plastic King, Hala"), the trademark name Teflon, in China, due to the pronunciation of the reason, "Teflon In China, due to the pronunciation, the trademark "Teflon" is also called "Teflon", "Teflon", "Teflon", "Teflon Teflon", "Teflon", "Teflon", "Teflon", "Teflon" and so on, w
Carbon Fiber Reinforced Polyetheretherketone Performance and Application Areas In the development of carbon fiber, our common thermosetting carbon fiber can no longer meet the demand, thermosetting carbon fiber product performance advantages performance is very good, but in the environmental protection and recy
What is Acrylic? Is it Glass or Plastic?
What is Acrylic? Is it Glass or Plastic? Acrylic is the most common name we call this material, also known as Plexiglas, the English name is Polymethyl methacrylate, after the English translation called acrylic, abbreviation is PMMA, its full name is called polymethyl methacrylate, its raw materials belong to the acrylic class of chemicals.
PEI and PEEK are both high-performance engineering plastics that are similar in many ways, but also have some key differences. Polyether ether ketone (PEEK): PEEK is a thermoplastic engineering plastic with excellent properties, which is formed by the polycondensation of 4% a
ULTEM ™ PEI Polyetherimide Plastic Product Family
About ULTEM ™ PEI ULTEM™ PolyEtherImide (PEI) is an amber transparent high-performance polymer which combines high strength and rigidity at elevated temperatures with long term heat resistance. ULTEM™ is available in unfilled and filled grades in sheet, rod, tube, film and injection molded and machined parts. ULTEM ™ PEI Key Properties
What Are the Advantages of Antistatic PC over ordinary PC ?
What is antistatic PC Antistatic PC is a colorless and transparent amorphous thermoplastic material. Antistatic PC sheet is widely used in the construction of clean room plants (semiconductor, LCD, e
Characteristics And Applications of PA66+GF Materials
Characteristics and applications of PA66+GF materials Performance advantages 1. High strength: The strength of PA+30%GF material is very high, which is much higher than that of ordinary plastic materials. Its tensile strength can reach more than 100MPa, and its bending strength
What is PTFE? English abbreviation: PTFE Chinese name: Polytetrafluoroethylene Chinese alias: PTFE/Teflon/Teflon/teflon/Teflon/4F/King of Plastics
1.What is fluoroplastic? Fluoroplastics are made by polymerization of fluorine-containing monomers. Produced by homopolymerization or copolymerization reaction, of which, PTFE plastic is the largest production and use of products, due to the outstanding chemical stability and is known as the "king of plastics"; the king of plastics, "PTFE" has excellent performance, wide range of applications, in addition, PV
Introduction to polychlorotrifluoroethylene (PCTFE): Chinese alias: PCTFE English name: poly(chlorotrifluoroethylene) Alias: halocarbon oil 27 insect cell*culture tes
Why choose HONY plastic Nylatron® MC901 H.S. PA6 nylon 6
What is Nylatron® MC901 HS PA6 ? Nylatron® MC901 HS PA6 is a heat stabilized nylon offering long-term thermal stability to 260°F. It is blue in color and used in a variety of bearing and structural applications such as wheels, gears, and custom parts.
Excellent Performance of PPSU Materials in Food Applications
What is PPSU and is PPSU a food grade plastic? PPSU is an amorphous thermoplastic that is highly transparent and hydrolytically stable. The product can withstand repeated steam sterilization. PPSU, scientific name: Polyphenylene sulfone resins (Polyphenylene sulfone resins) PPSU polyphenylene sulfone resins are Polysulfone (P
Carbon graphite material has self-lubrication, high mechanical strength, low coefficient of friction, high temperature resistance, good anti-wear, widely used in machinery, chemical industry, petroleum, instrumentation, pumps and other fields. Conventional graphite materials are less than ideal in terms of wear resistance and corrosion resistance, while silicified graphite, as a novel engineering material, has the properties of both carbon graphite and silicon carbide, and is used in a wide range of applications.
Semitron Esd Antistatic Material
SEMITRON ESD series products (anti-static series) are widely used in some sensitive electronic components. There are 8 types of SEMITRON ESD products, which are specially designed to solve the static electricity problems arising from the operation of equipment, and all of them can be supplied by HONY Plastic as original products: 1. SEMITRON ESD 520HR PAI Taupe Gray (Anti-static PAI);
What is the difference between PEEK and fluoroplastics? PEEK and fluorine plastic difference is very obvious. Temperature resistance: PEEK melting point of 334 degrees, heat distortion temperature of more than two hundred nearly 300 degrees, long-term use temperature of 260 degrees
What is MC Nylon Pulley MC nylon pulley is a liquid that is heated into a mold and then molded at high temperatures, often called cast nylon. It is a widely used engineering plastic in almost the entire industrial field. It is a casting product formed by using anionic polymerization reaction technology, in which dissolved caprolactam monomers with catalysts are poured under atmospheric pre
Advantages and areas of application of Spring Seals
What is a Variseal? Spring Seal (Spring Seal/ spring energized seal/ Variseal) is a high-performance seal with a special spring inside a U-shaped Teflon seal, where the sealing lip (face) is pushed out by the appropriate spring force coupled with the fluid pressure of the system and gently pressed against the metal surface to be sealed to produce a very excellent sealing effect. The actuation effect of the sp
Characteristics and Applications of PA66+GF Materials
Characteristics and applications of PA66+GF materials Performance Advantages 1. High strength: PA + 30% GF material strength is very high, much higher than the general strength of plastic materials, its tensile strength of up to 100MPa or mor
Tel: 86-852-34604012
Whatsapp: 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
