What is the water absorption of nylon ? Polyamide (PA) commonly known as nylon, density of about 1.15g/cm3, is the main chain of the molecule contains repeating amide groups -[NHCO]- thermoplastic resin general term, including aliphatic PA, aliphatic-aromatic PA and aromatic PA. aliphatic PA varieties of which many, large production, widely used, and its name from the synthesis of Its name
High Strength Plastic Screws Selection Guide
Plastic screws (plastic screws), also known as plastic screws, commonly used in the plastic screws for thermosoluble injection molding, according to the main material: nylon PA66 screws, PP screws, PVC screws PE screws, etc., the characteristics of the material is different, so the scope of application is also different. Plastic screws (plastic screws), also known as plastic screws, commonly used in domest
Neoflon FEP NP-20 Tubing Applications
What is NEOFLON FEP NP-20 is a melt processable fluoropolymer Introduction - NEOFLON FEP NP-20 is a copolymer of tetrafluoroethylene and hexafluoropropylene. - Quite similar properties as PTFE. Chemical, electrical and mechani
Nylon, also known as Polyamide = PA Key properties: abrasion resistance, low coefficient of friction, impact resistance, electrical insulation, corrosion and chemical resistance. Nylon is a strong, tough engineering plastic with excellent abrasion, chemical and high-pressure res
Know Super Materials: Polyetheretherketone (PEEK)
PEEK (Polyetheretherketone) Polyetheretherketone (PEEK) is a semi-crystalline, high performance engineering thermoplastic. It is a high-temperature wear-resistant material, and its inherent wear resistance and high strength make it ideal for harsh environments.
Plastics in Detail Acetal = Polyoxymethylene (POM) = Polyacetal = Polyformaldehyde, Race Steel Key properties: high mechanical strength and stiffness, low coefficient of friction, good wear resistance, natural lubrication, machinability, low moisture absorption, chemical resista
Typical Plastic Properties And Applications
Typical plastic properties and applications
Peek, Acetal, Nylon, Teflon, Torlon, Vespel, PP, PU, PVC - Plastic Pyramid
Peek, Acetal, Nylon, Teflon, Torlon, Vespel, PP, PU, PVC, the complete list of plastics is finally complete In mechanical design, often used plastics are Peek, Acetal, Nylon, Teflon, Vespel, PVC, PP, PET, PU and so on.
PBT Vs.PET in food processing equipment
In the food industry, different types of plastics are used for different applications, and choosing the right material is critical to ensuring the safety and quality of the food produced. Polybutylene terephthalate (PBT) and polyethylene terephthalate (PET) are two common plastic materials used in food-related applications. In this article, we will explore the advantages and disadvantages of PBT and PET plastics for food-related applications and the differences between these materials.
Polyimide (PI) - The Super Polymers
HONY plastic can provide super high temperature resistant special engineering plastics-polyimide profiles, such as rods, plates, tubes as well as injection molding and machined products according to the specific needs of the customers with temperature resistance grades of 220℃, 260℃, 300℃, 350℃ and above respectively. Polyimide can be compounded with molybdenum disulfide, graphite, carbon fiber, polytetrafluoroethylene, etc., which can greatly change the mechanical strength of the material and self-lubricatin
PEEK Tubing Vs. PEEK Hexagonal Extrusion Tubing
PEEK tubing, what is PEEK tubing? In order to meet the market demand, HONY Plastic's PEEK tubing to meet the application of different occasions has been mass-produced with high efficiency and good value for money. It can be used to manufacture all kinds of industrial piping, instrument piping, valve piping, pipe fittings and so on.
High Strength Alternatives - PEEK Screws
The role of screws is mainly to connect two workpieces together and act as a fastener. Screws are used in general equipment, such as cell phones, computers, cars, bicycles, all kinds of machine tools, equipment, and almost all machines. Screws have important tasks in industry, as long as there is industry on earth, the function of screws will always be important. Screws have been a common invention in people's productive lives for thousands of years and are the first major invention of mankind according to the field of application
Vespel® parts, manufactured by DuPont to your design specifications, are made from a variety of materials (polyimides, thermoplastics, composites and chemically resistant polymers). These products offer a unique combination of the physical properties and design flexibility. Parts can be designed to simplify product assembly and may reduce the need for other parts. As with metals and ceramics, Vespel® parts can successfully perform in demanding physical environments.
DuPont™ Vespel®PI (Vespel) Polyimide | Aerospace, Semiconductor, and Transportation Best Material
What is Vespel®PI (Vespel) Polyimide PI VESPEL series is a new type of high-temperature thermosetting engineering plastics, due to its ability to maintain high physical and mechanical properties in a wide range of temperatures of minus 270-400 degrees Celsius, at the same time, can be used in the air for a long period of time at -240-260 degrees C
Vespel is one of the most heat-resistant and wear-resistant of the high performance resins now available for mass production. It can be used under non-lubricated conditions (high PV value) at a height of 10 times or more without affecting other materials, and therefore will not cause any harm. Vespel is a typical representative of the polyimide (PI) plastic series.
2023 Chinaplas Rubber & Plastics Exhibition PEEK, PI, PPSU new product sharing
PEEK material related products No.01, New Energy Vehicle Flat Wire Motor PEEK Flat Wire
Acrylic Pusher Sheft from honyplastic Application in USA commercial retail giant Krog
U.S. fresh commercial retailers --- Kroger, as one of the world's largest commercial retailers, a wide range of products and excellent merchandise display is indeed a major selling point of Kroger, especially in the field of fresh, can be said to be the world's ancestor, a shopping mall into the mall, the overall design of the inside as well as the furnishings do attract every customer, can definitely be said to be "high". kroger (U.S. Kroger) is one of the famous stores with a hundred years of history. Kroger (Ameri
Acrylic Display Products from honyplastic Application in USA drug retail giant Walgreen
American drug retailer---Walgreen, as one of the world's large drug retailers, the rich product range and excellent merchandise display is indeed one of Walgreen's major selling points. Walgreen (Walgreen) is one of the world's largest drug retailers, is one of the world's top 500, was founded in 1901 in Deerfield, Illinois, the United States, mainly eng
What is PTFE Teflon? Polytetrafluoroethylene (Polytetrafluoroethylene), abbreviated as PTFE, (commonly known as "Plastic King, Hala"), the trademark name Teflon, in China, due to the pronunciation of the reason, "Teflon In China, due to the pronunciation, the trademark "Teflon" is also called "Teflon", "Teflon", "Teflon", "Teflon Teflon", "Teflon", "Teflon", "Teflon", "Teflon" and so on, w
Carbon Fiber Reinforced Polyetheretherketone Performance and Application Areas In the development of carbon fiber, our common thermosetting carbon fiber can no longer meet the demand, thermosetting carbon fiber product performance advantages performance is very good, but in the environmental protection and recy
What is Acrylic? Is it Glass or Plastic?
What is Acrylic? Is it Glass or Plastic? Acrylic is the most common name we call this material, also known as Plexiglas, the English name is Polymethyl methacrylate, after the English translation called acrylic, abbreviation is PMMA, its full name is called polymethyl methacrylate, its raw materials belong to the acrylic class of chemicals.
PEI and PEEK are both high-performance engineering plastics that are similar in many ways, but also have some key differences. Polyether ether ketone (PEEK): PEEK is a thermoplastic engineering plastic with excellent properties, which is formed by the polycondensation of 4% a
ULTEM ™ PEI Polyetherimide Plastic Product Family
About ULTEM ™ PEI ULTEM™ PolyEtherImide (PEI) is an amber transparent high-performance polymer which combines high strength and rigidity at elevated temperatures with long term heat resistance. ULTEM™ is available in unfilled and filled grades in sheet, rod, tube, film and injection molded and machined parts. ULTEM ™ PEI Key Properties
What Are the Advantages of Antistatic PC over ordinary PC ?
What is antistatic PC Antistatic PC is a colorless and transparent amorphous thermoplastic material. Antistatic PC sheet is widely used in the construction of clean room plants (semiconductor, LCD, e
Tel: 86-852-34604012
Whatsapp: 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
